Galaxy Print Paint Pour Over a Glass Desk
Tips For Getting More Out Of Your Paint Sprayer
A paint sprayer is a fine investment for any homeowner. While most people think of paint sprayers for painting fences and porches, they are great for inside the home. Perfect for spreading stains, paints and clear finishes, a sprayer will save you an incredible amount of time. Here are some tips to help you use this painting tool properly and make it last longer. Ideal for any large painting area, they are also great for spindles, shutters and other items where the brushwork would be tedious and challenging. Paint interior rooms, fences, the exterior of your home and your porch railing. Following the manufacturer’s directions, properly thin the paint or varnish. Special paint thinners will create the perfect viscosity level without altering the antique effect mirror color of your chosen paint or stain. The right consistency is important to ensure that the paint moves freely through the machine without clogging it. Sprayers will create a fair amount of spray, so you should take steps to prevent overspray. You cannot edge with a sprayer, but you can mask off surrounding areas and spray right to the edge of the surface. Use double layers of newspaper attached with painter’s tape to protect windows, ceilings and your deck or patio. Your machine may have a cup that attaches directly to the sprayer, but these usually hold a limited amount of paint. Use the included clip to keep the intake hose of your sprayer attached to the bucket for a steady feed of paint. If the clip has been lost, you will want to invest in another one. If your paint spray suddenly sputters and fails, then your sprayer is not pulling in enough paint. Start by checking the intake tube. If it is in the paint, then lift it out and check the filter. Clean a clogged filter to resume painting. If the filter is not clogged, you will need to take the sprayer apart and check for other blockages. Cleaning the machine thoroughly after every use will allow you to avoid this issue. If the painted surface develops strange patterns, then it may not have been clean to start. Avoid the development of “fish eyes” by cleaning the surface to be painted before you start. If the pattern is too heavy in the middle, try adjusting the air pressure. It is important to clean the sprayer when you are finished with the job. Using a clean bucket of water, run clean water through the machine until it is coming out clean. An old bucket is perfect for catching the cleaning spray. Once the paint is removed from the system, disassemble the sprayer and clean every piece completely. Use a soft bristle brush and compressed air, taking care to remove all traces of paint from the moving parts. This will prevent problems the next time you need your sprayer. There is no doubt that a paint sprayer is a valuable investment. A chore that might take days of labor can be completed in a few hours, making it a fantastic time-saver. Take the time to prepare the area you will be painting, and clean the machine completely when the job is done. By following these simple steps, you will ensure that you can enjoy years of service from your new sprayer.
